|
GROUND
TO PATTERN KNIVES |
|
| All prices include the cost of steel, cutting, squaring, balancing
and profiling. 3/4" is added to the width of each knife to allow
for proper squaring and for the axial constant dimension of your choice
up
to 10mm or 3/8". .250" is standard if no axial constant
dimension is specified. |
| Call for pricing and information on Carbide Inlay and Piggy Back GTP knives |
| Knife stock is 5/16" thick M2 for all knives up to 2 1/2".
Add $4.00 per inch for DGK-2000™ heat reflective
steel. Minimum knife depth used is 1-1/2" as standard. 1-1/4"
available only
if shallow pocket cutterheads are being used. This is
to assure safe installation of the knife into the head body. |
 |
Custom Templates
Send us a product sample or drawing. We will create a CAD drawing for your approval. Once we receive approval, your templates are CNC machined to your specifications. |
| Custom Profile Template |
$30.00 |
| Existing Template Re-cut |
$20.00 |
| Steel Template |
call for pricing |
|
| Email drawings or questions to: [email protected] |
| MSI does not assume responsibility
for improperly installed or ordered knives. |
| To
properly assure that the knives will maintain the correct profile, the
following information is required: |
| Hook Angle |
Axial Constant Dimension |
Head Diameter |
 |
M2 HSS Knife Steel |
| 1 1/2" |
STRAIGHT KNIVES |
$10.00
|
1
3/4" |
DEPTH
UP TO 1/4" |
$20.00 |
2" |
DEPTH
UP TO 1/2" |
$22.00 |
2
1/4" |
DEPTH
UP TO 3/4" |
$22.00 |
2
1/2" |
DEPTH
UP TO 1" |
$22.00 |
2
3/4" |
DEPTH
UP TO 1 1/4" |
$22.00 |
3" |
DEPTH
UP TO 1 1/2" |
$22.00 |
|
| Email drawings or questions to: [email protected] |
| DGK Information |
 |
DGK Knife Steel
Ideal for production runs in maple. Ideal for short production runs in MDF (6,000 – 8,000 lineal feet). Great for long runs of all types of hardwoods. |
| 1 1/2" X 1/4" |
STRAIGHT KNIVES |
$8.00 |
| 1 1/2" |
STRAIGHT KNIVES |
$12.50 |
1
3/4" |
DEPTH
UP TO 1/4" |
$24.00 |
2" |
DEPTH
UP TO 1/2" |
$26.00 |
2
1/4" |
DEPTH
UP TO 3/4" |
$26.00 |
2
1/2" |
DEPTH
UP TO 1" |
$26.00 |
2
3/4" |
DEPTH
UP TO 1 1/4" |
$26.00 |
3" |
DEPTH
UP TO 1 1/2" |
$26.00 |
|
| Email drawings or questions to: [email protected] |
| To
properly assure that the knives will maintain the correct profile, the
following information is required: |
| Hook Angle |
Axial Constant Dimension |
Head Diameter |
| |
|
|
|
KEY FACTS
ABOUT DGK
Improved coating
Multi-stage coating process
Improves lubricity
Withstands over 2200º F
Coating is harder than carbide
Grinds with standard abrasives
Reduces nicks caused from mineral pockets
|
APPLICATIONS FOR DGK
HSS tools such
as moulder steel, router bits, saw blades and boring bits
Carbide tools such as router bits, carbide inserts,
saw blades, drill bits, and boring bits
Metal cutting tools such as drill bits, mill cutters,
lathe tools, and carbide inserts
|
|
